Maximum temperature of 300°C.
Ribbed enamelled steel oven base plate.
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate.
The six 5.5 kW high efficiency flower flame burners allow the flame to adapt to different size pans.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
40 mm thick oven door for heat insulation.
Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Unit is 730mm deep to give a larger working surface area
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Gas Power: 143178 Btu/hr (42 kW)
Standard gas delivery:
Natural Gas Gas Type Option:
LPG;Town Gas Inlet: 1/2″
Front Burners Power: 5.5 – 5.5 kW
Back Burners Power: 5.5 – 5.5 kW
Middle Burners Power: 5.5 – 0/5.5 – 0 kW
Back Burners Dimension – mm Ø 60 Ø 60
Front Burners Dimension – mm Ø 60 Ø 60
Middle Burners Dimension – mm Ø 60 Ø 60
Oven working Temperature: 110 °C MIN; 300 °C
MAX Oven Cavity Dimensions (width): 760 mm
Oven Cavity Dimensions (height): 390 mm
Oven Cavity Dimensions (depth): 540 mm